Production efficiency of large extrusion blow molding machine

Production efficiency of large hollow blow molding equipment

What is the production efficiency of large hollow blow molding equipment? Is it productive? Approximately how many pieces can be produced? Deman Machinery will give answers to these questions about the efficiency of large-scale hollow blow molding.

Since large hollow blow molding equipment is used to produce large plastic products, compared with small product processing equipment, both the operation process and processing technology are more complicated, so the production efficiency may be higher than those of small equipment lower.

On average, the extrusion blow molding efficiency of large products is 100-300 pieces per day.

The production efficiency level of large hollow blow molding equipment depends on two aspects: one is the performance of hollow blow molding equipment, and the other is the products produced.

In the case of the same products produced, the production efficiency of extrusion blow molding machine with different performances must be different. If you want to process and produce products efficiently, you must choose equipment with stable performance and high productivity.

How to measure whether the production performance of a extrusion blow molding equipment is stable?

Device performance is partly dependent on device configuration. In the production process, certain technological processes or major supporting facilities are crucial to improving the production efficiency of equipment. Taking Deman Machinery hollow blow molding equipment as an example, let me introduce to you some processes and main supporting facilities that can improve production efficiency in hollow blow molding equipment.

•  Infrared or electromagnetic induction heating, continuous and stable heating, saving heating time and ensuring the heating effect;

•  IKV screw, high plasticizing capacity, shortening the plasticizing time of raw materials;

•  Servo motor can ensure the continuous and stable supply of equipment energy on the basis of energy saving;

•  PLC control system, accurately control each production process, high level of automation, can realize continuous production of products;

•  The pressurized oil cylinder enhances the clamping force;

It is precisely because of the control of the above process and supporting facilities that the equipment failure rate is low, the molding speed is fast and stable, and the overall production efficiency is also improved.

Of course, the configuration terms that appear in the above content are just examples, but the corresponding production process is indeed the main aspect to improve the efficiency of extrusion blow molding in equipment production.

Another aspect related to equipment production efficiency is the products produced.

Different products have different production process requirements. If we use the method of producing plastic buckets to produce pallets, it may not affect normal production, but it must not achieve good production efficiency.

Therefore, we need to formulate different product production plans according to different products. The plan should include: raw material selection, production process parameter setting, and the desired production effect. The formulation of the production plan must conform to the actual situation of the product, so as to achieve good production efficiency.

In fact, the efficiency level of hollow blow molding is not only reflected in the quantity of products produced, but also in the quality of products. The purpose is to produce products with high efficiency and stable quality. Therefore, while we increase the production speed of equipment, we should pay more attention to the quality of products. If you have related product production equipment needs, you can learn about it on the Deman Machinery extrusion blow molding equipment page, or consult online according to your product production needs